Steps for making OrCAD simulations
- Go to Start --> Programs -->OrCAD Release 9.1 -->Capture CIS
- Go to File -->New -->Project...
- Give a name for your project.
Select Analog or Mixed-signal Circuit Wizard.
Choose a folder for saving your project.
Click on OK.
- For digital simulations Add (double click on) 7400.olb (conatins TTL ICs)
For analog simulations Add (double click on) opamp.olb (conatains Op-Amps
including uA741) and diode.olb (contains diodes)
- Now make the circuit in the schematic window. Use the following buttons:
A sample schematic:
- Save your work. Click on File -->Save.
- Place voltage markers and run the simulations using the following buttons:
- View the resulting waveforms.